PRO GOLD Cobalt 135 Degree Drill Bit 31/64" Diameter
SKU:
P45432
$14.45
$14.45
Unavailable
per item
PRO GOLD Cobalt High Speed Steel Drill Bits are designed to cut through extremely hard metals, including stainless steel. No center point is needed, as these 135° quick cut points are self-centering and penetrate faster with less pressure. Will not walk or wander at the starting surface. Extremely heat-resistant, these drill bits are most efficient in drills that operate at 1500 RPM or more. Cobalt high speed steel drill bits offer a 12X life rating, compared to standard 118° point drill bits.
- Cuts through hard metals, including stainless
- 135° quick cut points are self-centering and will not walk or wander
- High speed bits are heat-resistant and operate most efficiently at 1500 RPM or more
- Has 12X life rating of standard 118° point drill bits
CUSTOMERS ALSO BOUGHT THESE PRODUCTS AS WELL
PRO GOLD Cobalt 15 Pc Drill Bit Set 1/16" diameter thru 1/2" diamenter by 1/32ndsWhy Pay anywhere from $215.00 to $289.00?
- 15 Pieces from 1/16 diameter thru 1/2" diameter by 1/32nds - 100% M42 COBALT Steel - Exceeds 100 Degree F Cutting Temps - 135 Degree Safety Tip - Requires NO Pre Drill or Hole Punch - Cuts on Curved Surfaces - All Metals including Stainless Steels, Alloys, and Armor Plates |
PRO GOLD Cobalt 29 Pc Drill Bit Set 1/16" diameter thru 1/2" diamenter by 1/64ths0Why Pay anywhere from $229.00 to $349.00?
- 29 Pieces from 1/16 diameter thru 1/2" diameter - 100% M42 COBALT Steel - Exceeds 100 Degree F Cutting Temps - 135 Degree Safety Tip - Requires NO Pre Drill or Hole Punch - Cuts on Curved Surfaces - All Metals including Stainless Steels, Alloys, and Armor Plates |
PRO CUT SPIRAL Pointed Drill & Tap Set COARSE 6/32 thru 1/2-13 with Pro Cut BitsThe Professional's Choice.... A Machine Shop at your finger tips! The proper Tap with its proper drill bits. When using taps from #6 diameters thru 1/2-13, you use a Numbered, Lettered, and Fractional Bit for those sizes. Why Inventory over a 100 different bits between Numbered, Lettered, & Fractional when you only need those bits for these taps?!?!? This is a NO BRAINER! Hello?!?!?!
- PRO CUT HSS Spiral Taps - PRO CUT Drill Bits - Coarse Thread - Isolates each Drill & Tap - Permits easy selection |